How to read your HAZECO bill, line by line

Every box on your HAZECO bill explained in plain words, with NEPRA's 2026 rates, FPA, taxes and a sample bill you can check line by line.

Guide · Updated · 12 min read
Transformer on an electric pole near forested mountains, a scene like the hills served by HAZECO, illustrating how to read HAZECO bill charges
Photo by Jay Heike on Unsplash

Your HAZECO bill has four parts: your connection details, your meter reading and units, the charges (energy, fixed charges, FPA and taxes), and the amount you must pay before and after the due date. Once you know where each part sits, reading the bill takes two minutes. This guide shows how to read HAZECO bill details box by box, using NEPRA's official 2026 tariff figures and a sample bill with fake numbers, so you can spot a mistake before you pay.

Close-up of an electricity meter whose readings are used to work out the units on a HAZECO bill
Photo by Jon Moore on Unsplash

The quick answer: the four parts of every HAZECO bill

Bill layouts change a little from time to time, so look for the labels rather than a fixed position on the page. In practice, every electricity bill from HAZECO carries the same kinds of information:

  1. Connection details: reference number, consumer ID, name and address, tariff category, sanctioned load, division and sub-division.
  2. Meter reading: previous and present readings, the reading dates, the units consumed and a history of your past months.
  3. Charges: the cost of the units (variable or energy charges), fixed charges, fuel price adjustment (FPA), any quarterly tariff adjustment, and government taxes.
  4. Payment box: arrears, current bill, the amount payable within the due date, the due date itself and the amount payable after it.

Part 1: your connection details

Reference number and consumer ID

The reference number is the 14-digit number that online bill checkers, payment apps and complaint desks use to find your bill. The consumer ID is a separate, shorter number printed on the same bill. Do not mix them up. Our guide on where to find the HAZECO reference number and what to do if it fails explains the label, the spacing and the trailing letter in detail. If you want to confirm that the number you copied has the right format, use the free 14-digit reference number checker.

Tariff category

The tariff line tells HAZECO which price list applies to you. Homes and places of worship fall under tariff A-1 (Residential). Shops and offices are A-2 (Commercial). If your home bill shows a commercial tariff, you will pay commercial rates, so this is worth checking once on every new bill.

Sanctioned load

Sanctioned load is the load in kilowatts (kW) that you applied for and HAZECO approved. It matters more since 2026, because fixed charges for most homes are now worked out per kW of load (more on that below). HAZECO's tariff terms also say that a connection with a sanctioned load of 5 kW or more is supplied on three-phase and moved to Time of Use (ToU) metering.

Division, sub-division and feeder

These lines name the HAZECO office that looks after your connection. Your sub-division is the office to visit for a correction or a wrong reading.

💡

Never post a photo of your bill on social media or in a public group. The reference number lets anyone look up your bill, name and usage.

Part 2: meter readings and units consumed

This box decides how much you pay, so read it slowly. You will usually see a previous reading, a present reading, the reading date and the units consumed.

How units are worked out

Units consumed are simply the present reading minus the previous reading. If the previous reading was 14,350 and the present reading is 14,500, you used 150 units (kWh). Some connections also print a multiplying factor (MF); for most homes it is 1, so the difference is your units.

The quickest test of any bill is to walk to your meter, note the reading, and compare it with the present reading on the bill. Your meter should now show a slightly higher number than the bill, because you have kept using power since the reading date. If your meter shows a lower number than the bill, the bill may be based on a wrong or estimated reading, and you should raise it with your sub-division office before the due date.

The billing period and pro-rating

Under HAZECO's NEPRA-approved terms, a billing month is 31 days or less, counted from the last meter reading. If a reading is taken late and the period runs longer than the calendar month, the units are pro-rated to the number of days in that month to decide your slab rate.

The consumption history table

Most bills print your units for past months. Compare this month with the same month last year, and count how many recent months were at or below 200 units. That decides whether you are a protected consumer.

Calculator and pen on a sheet of paper, ready to check electricity bill charges by hand
Photo by Mediamodifier on Unsplash

How to read HAZECO bill charges: energy and fixed charges

For a home, there are two main charge lines: the variable charge (the cost of your units, often printed as energy charges or cost of electricity) and the fixed charge.

Lifeline, protected and unprotected: which one are you?

NEPRA's tariff terms for HAZECO define three groups of residential consumers:

This is why one bad month matters. If you cross 200 units even once, you no longer meet the "consistently for the past 6 months" condition, and you are billed at unprotected rates until you qualify again.

The 2026 residential rate table

The table below shows the government-applicable residential rates in NEPRA's decision of 11 February 2026 on rationalization of tariff, which added per-kW fixed charges for most homes. Variable rates are per unit (kWh); fixed charges are per kW of sanctioned load per month.

Residential slab (A-1)Fixed charge (Rs/kW/month)Variable rate (Rs/unit)
Lifeline, up to 50 unitsNone3.95
Lifeline, 51–100 unitsNone7.74
Protected, 1–100 units20010.54
Protected, 101–200 units30013.01
Unprotected, 1–100 units27522.44
Unprotected, 101–200 units30028.91
201–300 units35033.10
301–400 units40036.46
401–500 units50038.95
501–600 units67540.22
601–700 units67541.85
Above 700 units67547.20
Time of Use: peak / off-peak675 (on off-peak line)46.85 / 34.53

Look at the gap between the protected and unprotected rates for the same units. A home using 150 units pays Rs 13.01 per unit as a protected consumer and Rs 28.91 as an unprotected one. That is the single biggest reason two neighbours with the same usage can get very different bills.

How the fixed charge line works

According to the same NEPRA decision, fixed charges for non-ToU homes are based on the sanctioned load. For ToU homes, they are based on 50% of the sanctioned load or the maximum demand indicator (MDI) reading, whichever is higher. So a protected home with a 2 kW sanctioned load in the 101–200 slab would see a fixed charge of 2 × Rs 300 = Rs 600 for the month. Lifeline consumers have no fixed charge in this table.

If the fixed charge looks too high, check the sanctioned load printed on the bill.

Electric poles and power lines running past trees under a clear sky
Photo by Jaël Vallée on Unsplash

FPA and quarterly adjustment lines explained

Fuel price adjustment (FPA)

The fuel price adjustment, called FCA in NEPRA's documents, is the difference between the actual fuel cost of generating power in a month and the reference fuel cost built into the tariff. It can be positive (you pay extra) or negative (you get a reduction). It is always applied with a delay of about two months, and it is charged on the units you used in the reference month, not on this month's units.

A real example: in its decision of 4 September 2026, NEPRA approved a positive FCA of Rs 2.0581 per unit for July 2026 (actual fuel cost Rs 9.1511 against a reference of Rs 7.0929). NEPRA directed that it be shown separately on the September 2026 bill, calculated on the units billed in July 2026, and that it apply to all consumer categories except lifeline consumers, electric vehicle charging stations and prepaid consumers. You can read the NEPRA fuel charges adjustment decision for July 2026 yourself.

So if you used 180 units in July 2026, the FPA line on your September bill would be 180 × Rs 2.0581 = Rs 370.46, even if you used fewer units in September.

Quarterly tariff adjustment (QTA)

The quarterly adjustment covers other cost changes, such as capacity charges and system charges, that NEPRA reviews every quarter. Through S.R.O. 1501(I)/2026 dated 7 September 2026, NEPRA notified a positive adjustment for the second quarter of 2026, to be billed from September to November 2026 at a uniform Rs 0.5194 per unit. It applies to all categories except lifeline consumers, units billed under the incremental consumption package, and prepaid consumers. On a 150-unit bill, that line would be 150 × Rs 0.5194 = Rs 77.91.

💡

The FPA rate changes every month and can turn negative. Always compare the per-unit FPA on your bill with NEPRA's latest decision before deciding that the line is wrong.

Taxes and government charges on the bill

Sales tax

General sales tax is charged on electricity under the Sales Tax Act, 1990. The billing system calculates it on the taxable charges. A practical check is to compare it with last month's bill: similar charges should mean similar sales tax.

Income tax (Section 235)

The income tax line follows Section 235 of the Income Tax Ordinance, 2001. According to the FBR Withholding Tax Rate Card updated to 30 June 2026, a domestic consumer who is not on the Active Taxpayers List (ATL) pays nothing if the monthly bill is below Rs 25,000, and 7.5% if the bill is Rs 25,000 or more. Commercial and industrial consumers have a different, tiered rate. So if your home bill is Rs 26,000 and you are not a filer, expect an income tax line of about Rs 1,950. If you are a filer and still see it, take proof of your ATL status to your sub-division office.

Woman holding a smartphone, as when checking or paying an electricity bill online
Photo by Clay Banks on Unsplash

Arrears, due date and the amount payable

HAZECO's NEPRA-approved terms say that bills must be delivered at least seven days before the due date. If a bill is not paid in full by the due date, an LPS of 5% may be charged for the next three days, and 10% after that, on the billed amount excluding government taxes and duties. If your bill was delivered late, the surcharge only starts after the seventh day from delivery. You can read these terms in the NEPRA determination of HAZECO's supply tariff.

Peak hours for Time of Use connections

If your bill shows separate peak and off-peak readings, you are on a ToU meter. HAZECO's tariff terms set peak hours as 5 PM to 9 PM from December to February, 6 PM to 10 PM from March to May, 7 PM to 11 PM from June to August and 6 PM to 10 PM from September to November. Every other hour is off-peak.

Worked example: a sample bill checked line by line

Here is a made-up September 2026 bill for a home, with fake digits, so you can practise. The numbers use only the official rates quoted above.

Line on the billSample value (fake)What to check
Reference numberXX XXXXX XXXXXXXSame as your last bill
TariffA-1 ResidentialNot commercial
Sanctioned load2 kWMatches what you applied for
Previous / present reading14,350 / 14,500Present reading not above your meter
Units consumed150Present minus previous
Last six monthsAll at or below 200 unitsYou should be billed as protected
Fixed chargesRs 6002 kW × Rs 300
FPA (July 2026 units: 180)Rs 370.46180 × Rs 2.0581
Quarterly adjustmentRs 77.91150 × Rs 0.5194
Income taxRs 0Home bill below Rs 25,000

Now the energy charge. Because all six recent months were at or below 200 units, this home is protected and falls in the 101–200 slab. A simple ceiling check is 150 × Rs 13.01 = Rs 1,951.50: the energy charge cannot be higher than that if every unit were charged at the top protected rate, because the lower protected rate is cheaper. If your printed energy charge is well above this ceiling, check whether you were billed as unprotected. At unprotected rates, the same 150 units could cost up to 150 × Rs 28.91 = Rs 4,336.50, more than double.

Prefer not to do the sums by hand? You can always pull up the official version of your current bill through the free HAZECO bill check, and compare it with your paper copy line by line.

Calculator next to a laptop on a desk, used to compare a bill with official tariff rates
Photo by Jakub Żerdzicki on Unsplash

Common mistakes when reading the bill

Checklist before you pay

  1. The reference number matches your previous bill.
  2. The tariff is A-1 Residential for a home.
  3. The sanctioned load is what you applied for.
  4. The present reading is not higher than your meter shows today.
  5. Units = present reading minus previous reading.
  6. Your protected or unprotected status matches your last six months.
  7. The FPA per unit matches NEPRA's latest decision, applied to the right month's units.
  8. The arrears are correct, and you have receipts for past payments.
  9. You pay the amount "within due date" before the due date.

If any item fails, visit your sub-division office with your CNIC, the bill, and a photo of your meter showing today's reading. For more practical guides, browse our HAZECO bill guides or try the free HAZECO bill tools.

Key takeaways

Summary

Check a few lines in order: who you are, how many units you used, which rate applies, which adjustments were added and what you owe by when. With the official rates above and a look at your meter, you can catch most mistakes before you pay. New to the site? Start from the HAZECO Bill Online homepage. HAZECO Bill Online is an independent information site and is not affiliated with HAZECO or PITC; for any correction to your account, the official HAZECO sub-division office has the final word.

Frequently asked questions

Subtract the previous reading from the present reading. For most homes the multiplying factor is 1, so the difference is your units (kWh).
Under NEPRA's tariff terms, a non-ToU residential consumer who has used 200 units or less every month for the past six months.
The fuel price adjustment covers the difference between actual and reference fuel costs. It is charged about two months later on the units of the reference month, for example July 2026 FCA on September 2026 bills.
Since NEPRA's February 2026 decision, non-ToU homes pay a fixed charge per kW of sanctioned load, from Rs 200 to Rs 675 per kW per month depending on the slab. Lifeline consumers pay none.
Per FBR's 2026 rate card, a domestic consumer not on the Active Taxpayers List pays 7.5% only when the monthly bill is Rs 25,000 or more; below that it is zero.
HAZECO's NEPRA-approved terms allow 5% for the three days after the due date and 10% after that, on the bill excluding government taxes and duties.

This site is not affiliated with HAZECO or PITC. Always confirm amounts on your official bill.

Check your HAZECO bill now
Enter your 14-digit reference number to see the amount, due date and paid status.
Check Bill

More guides

Pay your HAZECO bill with JazzCash, Easypaisa or a bank app Step-by-step ways to pay your HAZECO bill from your phone, and how to confirm the payment. HAZECO reference number: where to find it and what to do if it doesn't work Where to find the 14-digit HAZECO reference number on your bill and what to do if your bill does not show online.